HP Series Pressure Washer
Hot / Cold / Steam Portable Electric Powered Pressure Washer
The HP Series line up has been expanded to include 3 Phase units!!
Click here for the Product Release flyer.
Look at the Tek Sheets below for details
High Heat / High Flow System:
The ultimate balance of heat and flow increases your
cleaning power providing a consistent superior performance.
Uniquely designed with Hydro Tek schedule 80 coils and
Auto ignition for peace of mind & ease of operation. High
capacity diesel burner with higher temperature rise for
faster cleaning.
Stainless Steel Coil Housing and Inner Wrap:
Lifetime corrosion resistance, inside and out - unmatched
coil protection, double wall protected to contain the intense
heat from the burner providing optimal long life and
performance.
Auto Start and Time Delay Shutdown:
Operator has total control over the system from the trigger
gun. This added convenience not only saves time and
effort, it reduces wear of the pump and produces an energy
efficient system that outperforms the traditional manual
on/off.
All Stainless Steel Frames and Panels:
Not just decorative flashes, these rugged and durable
panels offer lifetime corrosion resistance and protection of
your valuable investment from the harshest environments.
Keeps your machine looking like new for years to come.
Quick connects provide easy removal for full access to all
major components and the ultimate in serviceability.
Adjustable Temperature with Steam Setting:
Front mounted controls allows quick and easy adjustments
of temperature and steam settings with higher heat
than comparable washers for your toughest cleaning
applications.
NEMA4 – Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down area,
exceeding Industry standards. Special Hydro Tek control
box features easy to use controls and provides instant
access to electronics.
CAT Direct Drive Pump:
These Industrial triplex pumps feature extra service factor to outperform the competition in longevity. Featuring concentrically bored & polished, graphite impregnated ceramic plungers with advanced seal design to meet our ultimate standard, yours.
8 gallon Diesel Tank with filtration:
Heavy Duty “roto-molded” rust free fuel tank with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 5 hrs) eliminates interruptions.
3.5 Gallon Soap Tank:
Chemical tank holds up to 3.5 gallons of soap for added convenience. (Only on HP21004 and HP28004)
More Standard Features
- Full Pressure Inlet Soap Injection
- Quick Release Nozzles
- Heavy Duty Industrial Motor with standard thermal overload protection.
- Top Quality Unloader offers operator full pressure and flow by pulling the trigger.
- Adjustable temperature up to 250°F with steam setting
- Burst Disk Technology for operator safety
- Heavy Duty Hose 50’, 250° Rated
- Adjustable Pressure Wand
- 4 Wheel Kit for portability
Specifications
| Model | PSI | GPM | Temp. | HP | Voltage |
| HP20005E8 | 2000 | 4.2 | 250 F | 6.5 | 208/230v - 1ph 30a |
| HP22005E2 | 2200 | 4.2 | 250 F | 6.5 | 230v - 1ph 27a |
| HP22005E3 | 2200 | 4.3 | 250 F | 7.5 | 230v 3ph 21a |
| HP22005E4 | 2200 | 4.3 | 250 F | 7.5 | 460v 3ph 10a |
| HP30004E2 | 3000 | 3.9 | 250 F | 8 | 208/230v 1ph 34a |
| HP30005E3 | 3000 | 4.8 | 250 F | 10 | 230v 3ph 28a |
| HP30005E4 | 3000 | 4.8 | 250 F | 10 | 460v 3ph 13a |
| HP35005E3 | 3500 | 4.3 | 250 F | 10 | 230v 3ph 28a |
| HP35005E4 | 3500 | 4.3 | 250 F | 10 | 460v 3ph 13a |
Specifications may vary, consult factory for custom models
