Pressure Washer Hose Reels
If you are looking for a wall mount hose reel or a base mount reel for mounting almost anywhere, Hydro Tek universal mount reels are right for you. These reels are shipped fully assembled, ship quick, and are proudly made in the USA.
|AR100||250°F||150’ of ⅜”||3500||narrow-base mount, friction brake|
|AR150||400°F||150’ of ⅜”||5000||narrow-base mount, friction brake|
|AR110||250°F||250’ of ⅜”||3500||large-base mount, pop-pin brake|
|AR151||400°F||250’ of ⅜”||5000||large-base mount, pop-pin brake|
|AR152||cold||150’ of ⅝”||inlet||large-base mount, pop-pin brake|
|AR188||400°F||100’ of ⅜”||5000||wall mount to 16” stud width|
Need a pivoting hose
Look at the AR425. The stainless reel has a capacity of 150’ x 3/8”, 5000psi, 400° and is designed to mount on tubing with the enclosed clamp, or can be mounted on a wall. The reel has a friction brake for adjusting the drag depending on your job. It will pivot a full 360 degrees or you can slide the pin to lock the rotation where needed.
Ships fully assembled, ships quick & made in the USA
Stacking Hose Reels
Two stainless hose reels attached to a sturdy powder coated steel frame that conveniently bolts down to any flat surface.
Two configurations to choose from:
Part# AR325 has reel capacities of 250’ x 3/8”, 5000psi, 400° paired with a 150’ inlet reel.
Part# AR326 has reel capacities of 250’ x 3/8”, 5000psi, 400° paired with another of the same.
Ships in two boxes, ships quick & made in the USA