National Specials

New Products

New Products

NEW Stationary, Hot Water Washer
You now have an option for a diesel heated, stationary, electric powered pressure washer. Look through any of the HN Series which are usually natural gas heated to see your options for pressure, flow, and power requirements. This HN Series frame style is open and gives you the flexibility to install permanent exhaust ducting. Once you have chosen the correct model, add a -D to the end of the part number. The -D option lets us know to switch out the burner, add an 18g diesel fuel tank, and a few other internal modifications.
Part#, -D (behind any HN Series model number)
List Price $400

NEW Diesel Powered, Diesel Heated Mobile Wash Skid
The new SC30004D12 has a General pump, robust Kubota diesel engine, efficient 12v burner system and is competitively priced. In addition, it is quieter than similar models reducing environmental noise pollution.
Model# SC30004D12,
List Price $13,995

NEW High Reach. Low Impact Sprayer
This AC110 high reach sprayer is self contained and compact. It runs off two 6 volt batteries and will spray all day on a single charge. It sprays up to 40 feet high so your customer can avoid the hazards of ladders and scaffolding. The high output system is designed to deliver up to 50% more of the pump pressure at the spray tip than other soft wash systems. 75psi, 4gpm
Model# AC110
List Price $1795

NEW Gas Powered Vacuum Water Recovery System
Released in December, the new RGV40 Hydro Vacuum® has been shown at a few trade shows and round tables. If you haven’t seen it in action, contact your regional manager to find out when and where there may be one in an area close to you. It works very well for your customers who want to recovery water from over 350’ feet away and is ideal for restoration contractors and facilities maintenance contractors. To see a video go to,
Model# RGV40
List Price $9995

NEW Modular Filtration System
If your customers are looking for a mobile filtration system to add to their higher flow recovery system, have a look at the RPF15E1. A separate water recovery system collects the wastewater and transfers it into this pleated filtration system which processes 15gpm to filter water for reuse in their pressure washer. It can be mounted in a truck bed or on a
trailer. This RPF system works well with the Gas Vac (RGV)
or Portable Vacuum (RPV), available through the special order
Model# RPF15E1
List Price $9995

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.