National Specials

Upgrading to a PowerLight Igniter on the 12VDC Beckett Burner on your Hot Water Pressure Washer

Upgrading to a PowerLight Igniter on the 12VDC Beckett Burner on your Hot Water Pressure Washer

About a year ago, Hydro Tek started using the PowerLight igniters on Beckett ADC burners. The change resulted in a decrease in the total amp draw by 2-3 amps from the burner, which takes a significant load off the battery and voltage regulator of 12VDC systems. Customers looking into replacing the older constant duty igniters (BMT04) on older 12VDC units can now use the (BMT12) PowerLight igniter as a replacement on their hot water pressure washers. This igniter can be wired in by using the Blue-white striped and solid White leads to connect with the Red lead from the burner motor. The Black lead will connect with the Black lead on the burner motor and the ground leads. If the burner is equipped with a cad cell connect it to Yellow leads from the PowerLight igniter and without a cad cell simply cap off the Yellow leads.

Quick Tip: When removing the old igniter cut the red and black leads on the BMT04 and leave the leads connected to the existing leads as a reference point for the leads on the replacement PowerLight igniter.

Old 12v PowerLight Igniter BMT04

Old 12v igniter BMT04

NEW 12 VDC PowerLight Igniter BMT12

NEW 12v PowerLight Igniter BMT12

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.