National Specials

Answers to Your Frequently Asked Questions About Pressure Washers

National Specials Request Catalog
By
Comments Off on Answers to Your Frequently Asked Questions About Pressure Washers
Blogs

Answers to Your Frequently Asked Questions About Pressure Washers

Answers to Your Frequently Asked Questions About Pressure Washers

At Hydro Tek, pressure washers are our business. We know them inside and out and can answer any and all of your questions. If you want to know which pressure washer is right for your needs, feel free to reach out to us at 800-274-9376 . You can also read on to get general answers to some of the most commonly asked questions about pressure washers.

Do we need a hot water pressure washer or cold water pressure washer?

Without question, this is the most common question about pressure washers. There are many factors to consider when making your final decision, but it often comes down to whether or not you’ll need to clean surfaces that have grease or oil. If you plan to do so, then you’ll want a hot water pressure washer. If you’re going to be cleaning mud or caked-on dirt, then a cold water pressure washer is likely to do the job for you.

Do I need to focus on GPM or PSI?

Once again, it depends on what you plan to use the pressure washer for. If you’re going to be regularly cleaning up heavily soiled areas, then GPM (which means gallons per minute) is likely to be your priority. On the other hand, if you’ve got grime that’s stubbornly stuck, then PSI (which means pounds per square inch of pressure) is likely the most important.

Really the bottom line is that volume is the most important thing. When you get a quality pressure washing system, it should balance pressure and volume. If you need more information about your options and advice on which one’s best for you, reach out to Hydro Tek at 800-274-9376 .

What applications are stationary pressure washers best for?

There are many reasons that our clients end up choosing a stationary pressure cleaning system that’s permanently installed. For one, it’s often the best value compared to a portable model. In many cases, it will cost the same as a portable machine – or even less. If you have access to natural gas, a stationary pressure washer can run on that. It’s a much more cost-effective fuel than other options, plus you don’t need to refuel the burner system.

A permanently installed hot water pressure washer can be located in any room or shed that has piping or a hose to the wash area. This protects it from damage, weather issues, and even accidental operator abuse. Finally, a stationary system can be mounted right onto an equipment stand. This allows the totes or detergent barrels to be stored underneath, which minimizes the amount of space the pressure washing system takes up.

Get advice on which pressure washing system is best for you

There are a wealth of options out there and Hydro Tek has them all. Contact us at 800-274-9376 to get answers to your frequently asked questions and find out what your options are. We are happy to walk you through the choices, available accessories, and much more so that you know exactly which choice is right for you.

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU