National Specials

A Simple Guide to Using a Hot Water Pressure Washer to Clean a Deck

National Specials Request Catalog
By
Comments Off on A Simple Guide to Using a Hot Water Pressure Washer to Clean a Deck
Blogs

A Simple Guide to Using a Hot Water Pressure Washer to Clean a Deck

A Simple Guide to Using a Hot Water Pressure Washer to Clean a Deck

Without a pressure washer, getting a deck truly clean takes back-bending scrubbing and hours out in the hot sun. The good news is that if you have the right tools, it can be done much faster and much better. However, it’s also important to remember that wood is sensitive. You must follow the right steps to ensure you keep it safe while getting it clean.

At Hydro Tek we offer not only the pressure washers you need but the various accessories you need as well, along with water recycle systems and much more. Read on for a simple guide on how to wash a deck with a pressure washer and then reach out to us if you have additional questions on what equipment would work best for your needs.

Begin by getting yourself and the deck ready

First things first, give the deck a good sweep. Then rinse and wet it down with your garden hose, making sure that it’s thoroughly wet and that all dirt and debris is a thing of the past. To get yourself ready, grab some waterproof clothes, some gloves, and a pair of goggles.

Find the right pressure setting

You’ll use the unloader valve to find the correct pressure setting. If you want a lower pressure, turn the unloader counterclockwise, and turn it clockwise if you want higher pressure. Which is right will depend on the type of wood you have. If your deck is made of a soft wood such as pine, then you’ll need lower water pressure. Start by picking a test spot on your deck and start at around 600 PSI. Go higher if necessary but be careful because you can cause damage if the pressure is too high.

Use the right nozzle

We recommend using a quick connect tip nozzle that has either a 25-degree or 40-degree output. Using a quick-connect option means that you can cover a much larger surface area, which means the job’s going to get done faster. Start out using a back and forth spray motion and stay about two feet above the ground. Don’t let the nozzle get any closer than that to your wood or you may damage it.

Stay safe at all times

As you’re cleaning your deck, there’s nothing so important as keeping your safety in mind. Don’t point the nozzle at another person, at an animal, or at glass. It may seem obvious, but many people have no idea just how powerful a pressure washer is. It can do real damage and cause injuries if sprayed directly at a person.

If you’re interested in cleaning your deck, or using a pressure washer for any other purpose, then it’s a good time to contact Hydro Tek at 800-274-9376 . We offer a wide range of options, any one of which may work perfectly for your needs. We’re happy to go over what you plan to use it for and what your goals are in order to find the right package for you. Call today!

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU