National Specials

Wash Water Recycle Systems in Frederick MD

Wash Water Recycle Systems in Frederick MD
Contact your local Authorized Dealer:
McHenry Pressure Cleaning SystemsWebsite
100d Bucheimer Rd.
Frederick, MD 21701
Phone : 301- 663-4683
Fax : 301- 695-1411

Save water and protect the environment with Hydro Tek wash water recycle systems in Frederick MD.

Whether you do your pressure washing in a stationary wash bay or on the move at various job sites, a Hydro Tek wash water recycle system will be a valuable addition to your process. Depending on the model you choose, Hydro Tek wash water recycle systems in Frederick MD can be installed in a permanent wash bay or mounted on a truck or trailer for mobility. Because we design and manufacture our wash water recycle systems right here in the USA, we have total control over the performance and quality of our products. Countless industrial and commercial cleaning professionals depend on them in rugged work environments like:

  • Auto repair/detail shops
  • Maintenance yards
  • Diesel equipment repair facilities
  • Military bases
  • Municipalities
  • And more

Top 3 Benefits of Wash Water Recycle Systems in Frederick MD

Capture Water Runoff: Whenever you do a lot of pressure washing, you’re going to create a lot of waste water. Unless you have some way to control where this water goes, it can make a real mess. As a first step to cleaning dirty water, Hydro Tek wash water recycle systems in Frederick MD of course have to collect it. This can be accomplished using portable vacuum scuppers in the case of mobile pressure washing or a sump pit system in the case of wash bay cleaning.

Comply with Storm Drain Regulations: Getting hit with a fine for illegal storm sewer dumping is bad for business. Not only does it hurt your bottom line, it also hurts your reputation. Fortunately, our wash water recycle systems in Frederick MD make environmental compliance easy with advanced filtration systems to trap both heavy solids and smaller oily particles down to 5 microns.

Reduce Water Use: Clean water exiting the filtration system can be stored in a bulk water tank. You can hook your pressure washer up to this tank and recycle the water. Reusing your wash water is an excellent way to cut costs and also enhance your reputation as an environmentally responsible cleaning professional.

Why Choose Hydro Tek

At Hydro Tek, we don’t just give you hard-working equipment that can handle continuous daily use. We give you good-looking equipment that will look clean and professional for years to come. We protect our clients from the hassles of equipment malfunctions and breakdowns with high-quality, commercial-grade components. Stainless steel construction gives our wash water recycle systems in Frederick MD ample protection against rust and corrosion, even in wet wash bays. We utilize high grade industrial filters that can process lots of water before needing to be cleaned or replaced, so you can spend more time working and less time servicing your equipment.

Learn More Now

Are you ready to add Hydro Tek wash water recycle systems in Frederick MD to your operation? Contact us today. We’ll put you in touch with a Hydro Tek dealer in your local area who can meet all your needs.

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.