Hydro Tek Systems 1-800-274-9376
             National Special                    Find a Distributor       Contact Us           Tech Support

ULTIMATE LINE PREVENTATIVE MAINTENANCE:

While your pressure washer has been produced with quality materials and craftsmanship, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your Hydro Tek dealer for maintenance. A small investment in preventative maintenance will add many hours to the life of your pressure washer. Perform maintenance more often under severe conditions. Do not spray high pressure water onto the machine. Not all maintenance items apply to all machines.

  • Engine Oil - Inspect Daily (be sure to check the engine manufacture's recommendations for additional maintenance items)
  • Engine Oil - Change Every 50 hours
  • Oil Filter - Change Every 100 hours
  • Air Cleaner -Inspect Every 50 hours
  • Air Cleaner - Clean Every 3 months
  • Diesel Engine Coolant Check - Check daily (maximum 50% antifreeze)
  • Battery Level Check monthly (Check weekly on diesel engines)
  • Engine Fuel Filter - Change every 500 hours or 6 months
  • Spark Plug Maintenance - 500 hours or 6 months
  • Clean Fuel Tank(s) Annually
  • Replace Fuel Lines Annually
  • Pump Oil - Check Level Daily
  • Pump Oil - Change After first 25 hours, then every 6 months or 500 hours
  • Clean Burner Filter Monthly (More often if fuel quality is poor)
  • Remove Burner Soot Annually
  • Burner Adjustment/Cleaning Annually
  • Descale Coil Annually-(More often if required)
  • Replace Spray Nozzle every 6 months
  • Replace Quick Connects Annually
  • Clean Water Screen and Filter Weekly
  • Clean Float/Supply Tank Every 6 months
  • Replace High Pressure Hose Annually
  • Drive Belts - Tighten 6 months
  • Drive Belts - Inspect / Replace 6 months
  • Trailer Tires and Bearings - Monthly (Check tires for condition, tighten lug nuts, grease & check bearings

Fluid descriptions and capacities. (Capacity dependent on model)
Gas Engine - Oil: 30w Motor Oil .63 to 3qt Fuel: Unleaded Gasoline 8qt to 7 gal
Pump, General - Non detergent SAE 30w 34-41oz
Pump, AR - Non Detergent SAE 30w 10-41oz
Pump, Cat - Cat Hydraulic, non-detergent 10w-40 11-25oz

 

 

 

Hydro Tek Systems, Inc
Redlands, California, USA
92374
Phone: (909) 799-9222
Fax: (909) 799-9888
©2009-11 All Rights Reserved
Any prices quoted are in USD.

E-mail this page to a friend  |  Contact Hydro Tek via E-mail
Industry Links  |  To sign up for our On-Line newsletter, Click here.
Website Info | Downloads | General Pressure Washer FAQ's
Follow Us on Twitter or Facebook | Hablamos español

  Find Us on Facebook
Find a Local Distributor