National Specials

Portable Recycle Systems for Truck or Trailer Mount

National Specials Request Catalog
Portable Recycle Systems for Truck or Trailer Mount
  • AZV-RZV-Hydro-Loop-Recycle-System-v0911
  • Portable Wash Water Recycle Systems for Truck or Trailer Mount

Description

AZV55 & AZV88: Powered by Hydro Tek SC or SCU Series

A portable recycle systems powered by Hydro Tek SC Series the AZV55 and AZV88 portable recycle system is protecting the environment from wash water runoff and complying with governmental storm drain regulations is simple, economical and effective with the AZV Series. The AZV vacuum and filtration system provides 6 stages of filtration up to 8gpm continuous five micron processing of wastewater where soaps and other chemicals are not used. Wastewater is recovered through a vacuum scupper, up to 12gpm, to eliminate run-off. Recycled water is pumped back to your bulk water tank for reuse to power wash concrete or other flatwork. You may also choose to divert treated water to landscaping or sewer as permitted. Heavy solids are collected in the V-section of the tank and are easily removed through a quick purge dump valve. When combined with a Hydro Tek SC Series washer and ProTowWash® trailer or tank skid, you have a complete self-contained mobile wash, recovery, and recycle unit. The system is the choice of professional cleaners to protect the environment, conserve water, and comply with EPA storm drain requirements. (For use with cold water or hot water up to 200°F)

Features:

  •  Vacuum recovery rate of 12gpm, with high level shut-down
  • Wastewater process rate 5gpm for AZV55, 8gpm for AZV88
  • 6 stage filtration process, including 3 oil absorption areas – filters to 5 micron purity
  • Rustproof, all stainless vacuum chamber & housing, with external drain
  • Automatic pump out, 12v, 15amp, transfers water without interrupting pickup
  • Complete with a set of filters, oil absorbing sock, containment berms, vacuum scupper, vacuum hose

RZV10E1:

The RZV10E1 vacuum filtration has the same features as the AZV88.  Same 6 stage filtration as the AZV Series, the RZV can be installed on your existing truck, van or trailer and powered by an outside power source. Includes a 35’ power cord with ground fault interrupter that can be plugged into a standard 120v, 15amp wall outlet or a 3500 watt generator may be used for mobile applications. (For use with cold water or hot water up to 200°F.)

Features:

  • Vacuum recovery rate of 12gpm, with high-level shut-down
  • Wastewater process rate 9.8gpm 6 stage filtration process, filters to 5 micron purity
  • Rustproof, all stainless vacuum chamber & housing, with external drain
  • Automatic pump out, 120v, transfers water without interrupting pickup
  • Complete with a set of filters, oil absorbing sock, containment berms, vacuum scupper, vacuum hose

Specifications

AZV55: 12 gpm recovery, 5 gpm recycle

AZV88: 12 gpm recovery, 8 gpm recycle

-Powered by SC or SCU Mobile Wash Skid

AZV55/AZV88 Tek Sheet

RZV10E1: 12 gpm recovery, 9.8 gpm recycle

-Powered by a standard 120v wall outlet

(May not be powered by SC or SCU series 2900 watt generator)

RZV10E1 Tek Sheet

Request Information

Video

There is currently no video for this product, check out our YouTube Channel for other videos:

Hydro Tek YouTube Channel 

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU